Variant 250 Mod Clone ANGEBOT !
Variant 250 Mod Clone ANGEBOT !
1 Variant in Geschenk Box Nun können Sie sich hier die Variant Box in einem schicken Edelstahlgehäuse im bekannten Handystyling gönnen. Mit 260 Watt läßt diese Box keine Wünsche mehr offen. Zudem nutzt das System einen LI PO Akku.
Zwischen 0,1OHM bis 4,0OHM ist alles möglich. Ein gefederter Pluspol sowie eine durchdachte Akku Deckel
Technik vereinfachen die Handhabung. Maße :
100mm x 43mm x 24mm Gewicht :
280 Gramm Lieferumfang:
- Variant Box Clone by Limwell aus Edelstahl & Titanium
- Englische Gebrauchsanweisung
- Geschenkverpackung 1. Power supply and charge
1.1 Standard capacity: 6.0v-8.4v(working with 2 lithium polymer batteries); 9.5v-12.6v(working with 3 lithium polymer batteries)
1.2 Batteries are charged when taken out of the mod and connected to an specifically independent charger
2. Working parameters
2.1 Stand resistance: 0.27? (working with 2 lithium polymer batteries);
0.61? (working with 3 lithium polymer batteries)
2.2 power-off current: 12.6V < 300uA
2.3 value of resistance for the thermal fuse:01-4,0?
2.4 maintaining a constant power delivery with±0.1V voltage output? when resistance is over 0.27?, the maximum output is 0.2v less than battery voltage
1. In Constant power output mode: (1)margin of error:1W ; output wattage: adjustable 5w-260w; (3) Atomizer impedance is automatically matched to equalize the output of vapor
2. Input wattage: 6.0v-8.4v (working with 2 lithium polymer batteries); 9.5v-12.6v(working with 3 lithium polymer batteries)
3. With Resistance measurement of atomizer, the actual resistance impedance can be measured. Value of resistance ranges from 0.1? to 4?
4. Current voltage of batteries, output voltage, resistance of atomizers, output wattage and how long the mod has worked can be displayed
5. when the voltage of batteries is less than the set output voltage, it automatically shifts to the maximum voltage output of the batteries, so as to protect batteries
6. protection of output short-circuit and low resistance, when either occurs in the output end, the output is automatically cut off
7. pressing the firing button , electric quantity of batteries, real-time output voltage and wattage, electric resistance are all displayed on the screen
8. protection of a prolonged single puff (10s), no time limit in pulse mode
9. An indicator light suggests current working state by blinking
Operation and Display
1. Power on/off: holding on the ?menu? button for 2s to switch mod on , repeating it to switch mod off
2. Interface switch: by default upon startup, the interface is the one when mod is switched off last time, pressing the ?menu? button 5 consecutive times can switch between voltage mode, wattage mode and pulse mode
3. Under any interface, hold the ?menu? button on for less than 2s and then press the ?firing? button to lock screen, as marked by ?LOCK? on the left bottom of the screen. When the screen is locked, smoking is allowed but neither voltage nor wattage can be adjusted. In lock screen mode, hold the ?menu? button on for less than 2s and then press the ?firing? button to enter black screen mode under which smoking is allowed
Unlocking: in black screen mode, hold the ?menu? button on for less than 2s and then press the ?firing? button to unlock screen, as displayed by the timer icon on the left bottom of the screen
4. Serial-number interface: press the plus button on the right and the minus button on the left at the same time to enter serial-number interface , black screen smoking mode can not be directly switched into serial-number interface under which mod can not be shut down
5. Mod working with 2 lithium polymer batteries: under voltage interface, output voltage ranges from 2.0v-8.4v, to press the plus button on the right to increase voltage, to press the minus button on the left to decrease voltage
Mod working with 3 lithium polymer batteries: under voltage interface, output voltage ranges from 2.0v-12.6v, to press the plus button on the right to increase voltage, to press the minus button on the left to decrease voltage
6. Under wattage interface: adjustable wattage 5W-260W, press the plus button on the right to increase wattage, to press the minus button on the left to decrease wattage
7. Under pulse mode: adjustable wattage 1.0v-6.0v, to press the plus button on the right to increase voltage, to press the minus button on the left to decrease voltage. under pulse mode, voltage output is intermittent, so there is no time limit on a single puff
8. The indicator light blinks green intermittently during smoking. When any irregular value of resistance is detected, the indicator light blinks red 4 times and smoking can not be done. In smoking state, the indicator light blinks red 2 times to stop smoking when smoking protection time terminates. If battery voltage is low, the indicator light blinks red 3 times when the firing button is pressed, smoking can not be done.
9. In standby mode, if there is no operation on mod, it enters into suspend mode and automatically powers off in 30 minutes, in suspend mode, pressing any button can awaken the mod, when it is awakened, the interface returns to the one before it is awakened.
10. Pressing the firing button to start smoking, with the mark ?firing? on the left bottom of the screen and the indicator light blinks green, when the ?firing? button is loosened, smoking stops and the interface returns to what it was before smoking.
11. when thermal fuse fails to meet the requirement, ?CHK ATY? appears on the relevant place of the screen
12. The timer icon on the left bottom of the screen increases by one per minute to record the working time
13. Every press on the ?firing? button for 1s means one puff, the maximum number is 999, and auto save is secured when mod powers off.